View THBTGFR421-KR_4274074.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Customer:
Pb Free
SPECIFICATION
ITEM MODEL REVISION DATE CHIP LED DEVICE THBTGFR421-KR 080102
[Contents] 1. Features 2. Absolute maximum ratings 3. Electro-optical characteristics 4. Soldering profile 5. Outline dimension 6. Packing 7. Reel packing structure 8. Label Structure 9. Rank Division 10. Precaution for use
Customer
Approved by Approved by Approved by
Supplier
Drawn by Checked by Approved by
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
Seoul Semiconductor SSC-HBTGFR421-KR
- 1/8 -
1. Features
*Top view type full-color lighting chip LED *Package : 1.6x1.5x0.5mm, flat molding Type
2. Absolute Maximum Ratings Parameter Power Dissipation Symbol Pd Color Red Green Blue Red Green Blue Red Green Blue 5 -30 ~ +85 -40 ~ +100 Value 72 76 70 30 20 50 35 V Unit
(Ta=25) Remarks
Forward Current Peak Forward Current Reverse Voltage Operating Temperature Storage Temperature
IF IFM*1 VR Topr Tstg
*1 IFM conditions: Pulse width Tw 0.1ms, Duty ratio 1/10
3. Electro-optical Characteristics Parameter Forward Voltage Symbol VF IR IV Condition IF=10 VR=5V IF=10 IF=20 IF=20 IF=20 Color Red Green Blue Red Green Blue Red Green Blue Red Green Blue Red Green Blue Red Green Blue Min 1.7 2.7 2.7 45 90 25 615 515 465 Typ 1.9 3.0 3.0 0.1 0.1 0.1 65 160 60 625 525 470 20 35 25 150 150 150 Max 2.3 3.3 3.3 10 10 10 85 270 85 635 535 475 -
(Ta=25) Unit V
Reverse Current Luminous Intensity*2 Dominant Wavelength Spectral Bandwidth Viewing angle*3
mcd
d
2
1/2
*2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *3
1/2
is the off-axis where the luminous intensity is 1/2 the peak intensity.
[Note] All products confirm to the listed minimum and maximum specifications for electric and optical characteristics, when operated at 20mA within the maximum ratings shown above. All measurements were made under the standardized environment of SSC. (Tolerance: VF 0.1V, IV 10%, d 2nm)
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
SSC-HBTGFR421-KR
- 2/8 -
4. Soldering Profile Reflow Soldering Conditions/ Profile (1) Lead Solder -Preliminary heating to be at 150max. for 2 minutes max. -Soldering heat to be at 240max. for 5 seconds max.
LED Surface temperature
C Operation heating 240
150
~
Pre-heating
Temperature rise: 5C/sec.
Cooling: -5C/sec.
120
0 60 to 120 sec. 5sec. max
(2) Lead Free Solder -Preliminary heating to be at 150max. for 2 minutes max. -Soldering heat to be at 260max. for 10 seconds max.
LED Surface temperature C Operation heating 260
150 ~ 120 0
Pre-heating
Temperature rise: 5C/sec.
Cooling: -5C/sec.
60 to 120 sec.
10 sec.
(3) Hand Soldering conditions -Not more than 3 seconds @MAX280, under Soldering iron. SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
SSC-HBTGFR421-KR
- 3/8 -
Tolerance: 0.1,
Unit:
5. Outline Dimension
Anode(Common)
Green
0.05
Cathode
6. Packing
1.75 0.1
0.05
Blue
Red
[Recommended Solder Pattern]
4.0 1.5
+0.1 -0
0.1
1.75
2.0 0.05
0.2
0.05
0.05
3.5 4.0 0.1 0.5
0.05
1.730.05
(2.75)
8.0
0.2
0.7 0.05
180 +0 -3
11.4 9
0.3
2 0.2
+0.2 -0
22 13
0.2
Label
(1) Quantity : 4000pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10pitches to be 0.2mm
Tolerance: 0.2,
60
Unit:
(3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at 10 angle to be the carrier tape. (4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
SSC-HBTGFR421-KR
- 4/8 -
7. Reel Packing Structure
Reel
P/N : # # # # # # # # # #
#
SSC-HBTGFR421
Lot N o
#########
: 4000
Aluminum Vinyl Bag
P/N : # # # # # # # # # #
#
SSC-HBTGFR421
Lot N o
#########
: 4000
Outer Box
*Material: Paper(SW3B(B)) a 7inch 245 c
CHIP LED
PART CODE Q'Y T : : 40,000 E A :
S E O UL SE MIC O N D U C T O R C O ., L T D
TYPE
SIZE(mm) b 220 c 142
: SSC-HBTGFR421
CHIP LED b a
LOT NO : DATE
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
SSC-HBTGFR421-KR
- 5/8 -
8. Label Structure
P/N : ########## SSC-HBTGFR421-KR
#
Lot No CAA071116#######-## : 4000
Bin(A~R)
Day
Month
Year
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
SSC-HBTGFR421-KR
- 6/8 -
9. Rank Divitsion VF[V] (IF=10mA)
RED GREEN BLUE RED
[nm] (IF=20mA)
GREEN BLUE RED
IV [mcd] (IF=10mA)
GREEN BLUE
RANK
465~470 2.70~2.90 615~635 515~535 470~477 465~470 2.70~2.90 2.90~3.10 615~635 515~535 470~477 465~470 3.10~3.30 615~635 515~535 470~477 465~470 2.70~2.90 615~635 515~535 470~477 465~470 1.70~2.30 2.90~3.10 2.90~3.10 615~635 515~535 470~477 465~470 3.10~3.30 615~635 515~535 470~477 465~470 2.70~2.90 615~635 515~535 470~477 465~470 3.10~3.30 2.90~3.10 615~635 515~535 470~477
45~85
90~270
25~85
01
45~85 45~85 45~85 45~85 45~85 45~85 45~85 45~85 45~85 45~85 45~85 45~85 45~85 45~85 45~85
90~270 90~270 90~270 90~270 90~270 90~270 90~270 90~270 90~270 90~270 90~270 90~270 90~270 90~270 90~270
25~85 25~85 25~85 25~85 25~85 25~85 25~85 25~85 25~85 25~85 25~85 25~85 25~85 25~85 25~85
02 03 04 05 06 07 08 09 10 11 12 13 14 15 16
465~470 3.10~3.30 615~635 515~535 470~477
45~85
90~270
25~85
17
45~85
90~270
25~85
18
(VF, IV IF=10[mA], IF=20[mA] .)
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
SSC-HBTGFR421-KR
- 7/8 -
10. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant . Otherwise, to store them in the following environment is recommended. Temperature : 5~30 (2) Attention after opened However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. Temperature : 5 ~ 40 Humidity : less than 30% b. Keeping of a fraction Humidity : 60%HR max.
(3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 605. (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 805 or 12Hr at 1005. (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (10) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (11) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (12) The LEDs must be soldered within seven days after opening the moisture-proof packing. (13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (14) The appearance and specifications of the product may be modified for improvement without notice. (15) Static Electricity and surge damages the Blue/Green LEDs. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be properly grounded. (16) It is recommended to use individual resistor separately when the LEDs applies in parallel circuit so that it may improve the light deviations. (17) It is recommended to examine to the full the circuit by using resistor when the LEDs applies in case of lighting seven colors. (White colour is not available with single LED.) SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL: 82-2-3281-6269 FAX: 82-2-858-5537
SSC-HBTGFR421-KR
- 8/8 -

▲Up To Search▲

Price & Availability of THBTGFR421-KR

	To Download THBTGFR421-KR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .